At present, there are two types of masks, one is sealed and the other is vacuum. Generally speaking, different mask packaging forms use different flat mask packaging machines. Let's take a look at the differences between different flat mask packaging machines place.
When it comes to the differences between different flat mask packaging machines, we have to say different flat mask packaging machines. Today, we will focus on two models, one is a continuous roll vacuum packaging machine and the other is a stretch film packaging machine.
First of all, the difference between different flat mask packaging machines is the function of the equipment. The continuous rolling vacuum packaging machine has the functions of vacuum suction and sealing; the stretch film packaging machine has the function of automatic packaging, and the machine only has the functions of sealing and vacuum sealing, which realizes the multi-purpose of one machine.
Secondly, the difference between different flat mask packaging machines lies in the way they work and are used.
The specific performance is as follows: 1. After the continuous rolling vacuum packaging machine needs to manually bag the mask, lift up (open) the packaging bag strip and place the sealing position of the packaging bag flat on the sealing silicone strip, and place it stably and spread it out. , flatten, align, leaving room at both ends. When multiple bags are packed in the same room, the bags cannot overlap. Put down the packaging bag pressure strip, adjust the sealing margin of the packaging bag to an appropriate length, and finish the manual feeding operation (after entering the normal operation state, this process should be completed within one working cycle).
Press the "work" button, the equipment officially enters the cycle working state according to the set parameters, and the operator repeats the above actions to carry out the production operation. When there is no product (material) on the conveyor belt and working chamber (vacuum chamber), the operation can be shut down normally, and then the main power supply can be cut off.
2. When packaging masks by the stretch film packaging machine, the forming molds of the upper and lower films must be installed, and then the upper and lower films must be properly installed. After the equipment is turned on, the chain is in a working state, and according to the set parameters, it steps according to the regulations and runs the film regularly. Take a few steps to see that the extruded molding film is relatively stable before placing the product.
Two or four employees place products in the material area, and the machine moves forward automatically. As long as the machine is not turned off, masks can be placed all the time. The machine can only be set to operate with different functions such as sealing or vacuum sealing. It can also be sprayed to print the date, and then put The packaged product is cut into an individual package.
The difference between different flat mask packaging machines is also in the form of packaging. The continuous rolling vacuum packaging machine uses the packaging bag as the carrier, and the stretch film packaging machine uses the stretch film as the carrier. The packaging form is flat on one side and protruding on the other side.
The current epidemic is not completely over yet. People still need to wear masks for a period of time when they travel or even work. The difference between different flat mask packaging machines has little impact on the public. The main reason is that packaging masks protect us.
