In addition to the development of classical statistical analysis, time-frequency domain analysis, time series analysis and parameter identification models, refinement techniques, frequency, resonance demodulation analysis and cepstrum analysis, will also three-dimensional holographic spectrum analysis of high-speed slitter vibration signals, Axial trajectory analysis, short-time Fourier transform based on assumptions and non-stationary signals, wing distribution and wavelet transform for analysis and processing. Through the existing microcomputer-based real-time online monitoring and fault diagnosis system and portable monitoring and analysis system, the development of virtual instrument technology, fault diagnosis equipment and instruments is analyzed. Turn on the power supply of the slitter to ensure that the voltage, current and hydraulic system are correct and stable. Before the slitter equipment is ready for operation, all personnel must be notified to leave the equipment to ensure the personal safety of the personnel. During the inspection. Do not touch the Slitting Machine to avoid personal injury. During the operation, avoid cutting the core of each drum with a knife or hard object. One package: Before the equipment is put into use, make sure to adjust the position and add lubricating oil. Check whether the tool is sharp. After normal operation, the engine of the slitter will run for free, check whether there is any abnormality, and then enter the order in advance. After the work is finished, the equipment should be adjusted in time according to the production conditions of the working conditions to ensure that the middle pressure, burr cutting, and the right side are flat. Ensure that the cutting length of the slitting machine on the paper is smooth and accurate, increase the production management of the vertical and horizontal slitting machine, continuously monitor the operation status, and pay attention to product defects. After the work is completed, clean up the dust and paper scraps of the equipment in time, check the water in the grinding wheel, clean the oil water block and the water storage tank, and check whether the running parts are abnormal. Then according to the instruction, turn off the power and maintain the calculation. The main business of our company are making: Paper Bag Machine, Paper Handle Pasting Machine, Paper Rope Machine, Paper Handle Machine, Paper Slitting Machine, Paper Rope Rewinding Machine, Paper Rope , Paper Handles and Paper Bag . Welcome new and old customers to come and place orders.
