Ultrasonic mask body machine, also known as mask punching machine, is a machine for automatic production of multi-layer flat mask products. It can use 1~4 layers of PP spunbond non-woven activated carbon and filter materials. The whole machine starts from raw materials. It is expected that nose wire insertion, edge banding, and cutting of finished products are all automated operations on one line. Depending on the raw materials used, different standards such as N95 and FFP2 can be met. The plane mask production equipment has stable performance, high output, low defect rate and easy operation. The mask body machine plus several inner ear mask machines, outer ear mask machines, strap-type face mask Making Machines or ear strap spot welding machines can produce inner ear strap masks, outer ear strap masks, strap masks and other masks.
Machine parameters Machine size: 3900(L)*905(W)*1600(H)mm Voltage: 220V Capacity: 130-160pcs/min Frequency: 20KHZ Power consumption: 4KW Machine Features and Performance 1. Fully automatic feeding system 1. The aluminum alloy frame is strong and beautiful, ensuring the precise size of the finished product; 2. Stainless steel fixture, can be adjusted left and right; 3. The tension wheel is set to adjust the tension of the cloth, so as to effectively ensure the beauty and flatness of the finished product; 4. Independent nose wire delivery group, convenient for adjustment and maintenance. 2. Folding and forming system 1. Plug-in folding device, easy and quick to adjust 2. Large diameter welding wheel can effectively reduce product deformation. 3. Ultrasonic heat sealing system 1. Titanium alloy mould. When most mask machinery manufacturers use aluminum alloy, the mask machine has already provided and actively advocated customers to use titanium alloy mold, because compared with aluminum alloy, it is easy to oxidize and burst, and it is not suitable for long-term rush. Cargo operation, short service life and other shortcomings, the advantages of titanium alloy are obvious: A． Good toughness, suitable for long-term vibration; B． Thermal/ultrasonic conductivity is strong, thus ensuring the welding and cutting effect of the product is beautiful; C． High hardness, not easy to crack, deform and rust; D． Although its cost is about ten times lower than that of aluminum alloy, from the perspective of overall production efficiency, the choice of titanium alloy mold is obviously better than aluminum alloy. 2. Imported ultrasonic transducer, 20K international frequency standard, more powerful and stable output; coupled with two sets of ultrasonic systems, effectively guarantee the welding quality of the product. 3. The PLC program controls the movement of the whole machine, reducing the difficulty of operation for the user. 4. Discharging system 1. Two pieces of products can be molded at one time to increase production speed 2. The product discharge position is automatically stacked, which facilitates the finishing and stacking of finished products, saving time and effort for the next process of ear strap welding. 5. The performance of the whole machine is stable, the production speed is continuously adjustable, and the production efficiency is high, up to 160 pieces per minute. The counting is convenient and accurate, the utilization rate of raw materials is high, the operation and adjustment are simple and convenient, and the degree of automation is high, which effectively reduces labor costs. We are looking for partners, if you are interested in our Flat Face Mask Machine, KN95 face mask machine, please contact us, we will try our best to serve you.
