In the post-epidemic era, people's demand for masks is still relatively high. Under such circumstances, the Flat Face Mask Machine is still widely used. Because the loss caused by improper maintenance to mask manufacturers is relatively large, if the face mask making machine can be properly maintained, a lot of expenses can be reduced.
Daily maintenance method of flat face mask machine:
1. It is necessary to do a good job in ventilation, drying and cleaning of the working environment on a daily basis. A clean environment is conducive to the long-term operation and optimization of the flat mask machine.
2. The electrical control box and equipment vents should be kept away from the water source. At the same time, the principle dust and corrosive chemicals are also required, and the dust in the compressed air system should be cleaned regularly.
3. Regularly check the insulation performance of the line, and the electronic components that are easy to age should always check whether the line is firmly connected and whether the grounding device is reliable.
4. Regularly test the power supply voltage and current to ensure that the current and voltage meet the requirements of the equipment, so as to avoid the normal operation of the equipment due to the unstable voltage.
5. The first is to lubricate the transmission system. When it is found that the quality of the lubricating oil of the gear reducer has dropped significantly, it is necessary to replace the new lubricating oil in time.
6. Regularly clean the ultrasonic welding head and the bottom mold, and the working materials also need to be kept clean. It is recommended to check whether the connector is firmly connected once a week, and often wipe the appearance of the equipment, but do not use liquid to wipe, if it is dirty The marks are more obvious and can be wiped off with a rag dipped in some alcohol.
The daily maintenance of Flat face mask machine is introduced here. Although most of the maintenance content is trivial, it is of great help to prolong the service life of the equipment.
